Press­es

Ser­voSpindlePress SSP3-1250

Mul­ti-pur­pose blank­ing and form­ing press to be used for a vari­ety of dies.

Auto­mat­ed blank­ing and form­ing sys­tem:

  • Incl. roller feed
  • Man­u­fac­ture of blank­ing and form­ing parts for sports and leisure indus­try, the car sub­con­tract­ing, cycling, arma­ture, and elec­tri­cal indus­tries, and for the pro­duc­tion of home appli­ances, office fur­ni­ture, fur­ni­ture and lamps

Tech­ni­cal data:

  • Ton­nage: 1.250 kN
  • Force trans­mis­sion cen­ters / dri­ve units: 3
  • Bol­ster / ram area: 2.000 x 1.000 mm
  • Ram stroke, max.: 200 mm

Ser­voSpindlePress SSP4-3300

Try­out and pilot pro­duc­tion press with four ser­vo-hydraulic die cush­ion sys­tems for fine blank­ing, emboss­ing and cal­i­bra­tions.

Try­out and pilot pro­duc­tion press:

  • Blank­ing and form­ing parts for dri­ve sys­tems for pas­sen­ger cars, com­mer­cial vehi­cles, boats, avi­a­tion and amuse­ment rides
  • Ser­vo hydraulic die cush­ion sys­tems in bol­ster and ram

Tech­ni­cal data:

  • Ton­nage: 3.000 kN
  • Force trans­mis­sion centers/ dri­ve units: 4
  • Bol­ster / ram area: 1.200 x 1.000 mm
  • Ram stroke, max.: 500 mm

Ser­voSpindlePress SSP6-5500

Equipped with ser­vo trans­fer sys­tem, uni­ver­sal use for pro­gres­sive or trans­fer dies.

Trans­fer press:

  • Auto­mat­ed blank­ing and form­ing sys­tem with CNC ser­vo trans­fer sys­tem
  • Pro­duc­tion of small-sized to large-sur­face car seat parts, as well as car body and chas­sis com­po­nents made of high-strength steel

Tech­ni­cal data:

  • Ton­nage: 5.500 kN
  • Force trans­mis­sion cen­ters / dri­ve units: 6
  • Bol­ster / ram area: 3.250 x 1.500 mm
  • Ram stroke, max.: 500 mm

Mul­ti­pleStage­Press MSP2-500

Mul­ti­ple-die press for high­ly com­plex and pre­cise, small­er-sized deep drawn parts.

Mul­ti­ple-die press:

  • Blanking/cupping oper­a­tion at first die sta­tion
  • Ejec­tor and hold down sys­tems
  • Auto­mat­ed die change
  • Pro­duc­tion of com­plex deep drawn parts for pack­ag­ing indus­try

Tech­ni­cal data:

  • Ton­nage: 500 kN
  • Force trans­mis­sion centers/ dri­ve units: 2
  • Bolster/ ram area: 1.800 x 600 mm
  • Ram stroke, max.: 200 mm

Mul­ti­pleStage­Press MSP2-1250

Mul­ti­ple-die press for high­ly com­plex and pre­cise, medi­um-sized deep drawn parts, with supe­ri­or sur­face qual­i­ty require­ments.

Mul­ti­ple-die press:

  • Blanking/cupping oper­a­tion at first die sta­tion
  • Ejec­tor and hold down sys­tems
  • Semi-auto­mat­ic tool change
  • Man­u­fac­tur­ing of com­plex deep draw­ing com­po­nents used for dec­o­ra­tive pack­ag­ing

Tech­ni­cal data:

  • Ton­nage: 1.250 kN
  • Force trans­mis­sion centers/ dri­ve units: 2
  • Bol­ster / ram area: 2.900 x 800 mm
  • Ram stroke, max.: 250 mm

Ser­voSpindlePress SSP4-4200

Stamp­ing and form­ing press with 3 D — ser­vo trans­fer and blank loader.

Trans­fer press:

  • For man­u­fac­tur­ing of small to medi­um sized com­po­nents

Tech­ni­cal data:

  • Ton­nage: 4.200 kN
  • Force trans­mis­sion cen­ters / dri­ve units: 4
  • Bol­ster / ram area: 3.650 x 1.700 mm
  • Ram stroke, max.: 800 mm